Hand Lever Shear Bramley Model HS5 200mm / 8inch Blade
On a 930mm high stand (90x90 SHS) which can be bolted down.
Base is 300x300x10
Blurb from Bramley new version of 200mm Blade model 053
These Bench Mounted, Hand Lever-Operated Shears Are Intended For Cutting Sheetmetal, Mild Steel Plate, Stainless Steel, Flat And Round Bar.
Blades Manufactured From High Quality, Wear Resistant, Precision Ground Tool Steel Lever Toggle Action Gives High Mechanical Advantage For Easy Cutting
Body Manufactured From Thick Section Mild Steel Plate
Handle Balance Spring Assists Ease Of Operation
Simple Lower Blade Adjustment For Correct Shearing Tolerances
Suitable For Cutting Sheetmetal Capacity Model HS5 /053
Plate 5mm Flat 70 x 6mm
Round 13mm
Blade Length 200mm
Cutting Length (Max) 175mm
LEES BRADNER MODEL HT 21" x 98" THREAD MILLING MACHINE
Swing Over Bed Ways 32"
Swing Over Cutter Carriage 21"
Capacity Between Centers 98"
Max. Thread Cutter Diameter (Disc Type) 7"
Max. Thread Cutter Diameter (Hob Type) 3-1/2"
Max. Hole Thru Spindle 6" Cutter
Spindle Speeds 21 - 140 RPM
Approximate Weight 12,500 Lbs.
EQUIPPED WITH: Change Gears, Cutters, Tailstock & Tooling Accessories
Maximum O/D for hob with helical flutes..........230mm
Maximum O/D for hob with straight flutes........250mm
Maximum grinding slide stroke......................475mm
Maximum grinding wheel O/D........................250mm
Grinding wheel speeds infinitely variable from 1500-2700 rpm
Work spindle taper......ISO steep taper no:40
Weight approx 4600 kgs
The machine equipped with Automatic Dressing Attachment
Full set of Index plates
Full set of change gears & some std equipment
Coolant tank with Pump
Handbook Manual
Maximum O/D for hob with helical flutes..........230mm
Maximum O/D for hob with straight flutes........250mm
Maximum grinding slide stroke......................475mm
Maximum grinding wheel O/D........................250mm
Grinding wheel speeds infinitely variable from 1500-2700 rpm.
Work spindle taper......ISO steep taper no:40.
Weight approx 4600 kgs
Full set of Index plates
Full set of change gears & some Standard Equipments in a wooden carbinet
Coolant Tank with Pump
Handbook manual
Full Specification enclosed in Photo
Full set of Change gears & Accessories.
Excellent Condition.
Handbook manual available.
Pfauter P1251 Universal Gear Hobbing Machine Specification
Manufacturer PFAUTER
Model P1251
Condition Used
W/center support 49.25" (1251MM)
Wo/center support 60.00" (1524MM)
Maximum axial travel 39.37" (1000MM)
Maximum dp / module in steel 1.6 DP (15.87 MOD)
Min # of teeth (single-start index drive) 20 TEETH
Workpiece & hob, minimum 2.36" (60MM)
Workpiece & hob, maximum 31.5" (800MM)
Maximum hob diameter 10" (254MM)
Maximum hob length 11" (280MM)
Maximum hob travel 9.85" (250MM)
Diameter of hob arbors 1",1.25",1.5",2"
Taper for hob arbors MORSE # 5
Diameter of work table 47.24", (1200MM)
Table weight capacity 11,000 LBS (5,000KG)
Diameter of work table bore 12" (305MM)
Work arbor diameter 2.5" (63.5MM)
- hob speeds 30 - 180 RPM
- axial feed (0.5 - 6.000MM/PR)
- radial feed (0.170 - 2.000MM/PR)
- tangential feed (0.200 - 2.500MM/PR)
Total connected electrical load (approx.) 32 KVA
Machine overall length 291.80", (7412MM)
Machine overall width 169.80", (4313MM)
Macine overall height 137.75", (3500MM)
Machine overall weight (approx.) 50,700LBS (23,000KG)
2013 Atlas Copco ZT18 Air Compressor unit.
Machine is unused, it was installed from new into factory for a business venture that did not go ahead
76.8 CFM at 141 PSI
400V 3 phase
18.5 KW
Air cooled
Comes with 500L air tank
Weight: 1,075KGs Dimensions: 1620 x 1600 x 983 (WHD)
An identical second Air Compressor and Nitrogen Generator are available for seperate sale should the purchaser need
This is not a cold-cut type saw. It's an abrasive hot-cut type saw using PSF Chop Steelox Cutting blades.
The 3-phase 3Hp Motor runs at 1500rpm (that's what's on the motor spec) and is geared up to drive the abrasive blade at around 2,500rpm. Was used in a Stainless Steel fabrication Workshop and was very effective. No expensive Coolant required. Blades are around 1/10th of similar cold saw blade
Set up as Abrasive Saw Have used for Wood 3 Phase 3Hp motor 1500rpm Cuts from 45° to 135° Frame 2800 x 580 Bed 2800 x 240 3x Support Arms to give a total support length of 12m+ 8x New 80T Ø400 - 2.8K PSF Chop Steelox Cutting Blades 24 Used Abrasive Blades of various sizes Ø305 60T Wood Trimk / Finish Blade
Flowmeter for Argon gas control
Price is for single unit. Ask about pricing for more than 1 unit
6 Available
2x Tube and Pipe Fabrication Stands
390mm dia base
150mm high NB40 Galv Pipe
each has adjustable clamp with 2 types of interchangeable aluminium support brackets
Small support bracket 50x50 Angle Bar 80mm long
Large support bracket 100x100 Angle Bar 100mm long
Offer will be considered