CAPACITY:
Cone distance:- Max..............................18” 457 mm
Min...............................0 0
Pitch angle:- Max shafts at 90°.........84° 18’
Min...............................5° 42’
Extreme ratio..........................................10:1
Coarsest diametral pitch.........................1.25” 20.3 Module (or 1.8” max depth)
Index range.............................................10 - 100 inclusive & most numbers to 200
WORK SPINDLE:
Diameter of taper hole at large end.........6”
Taper per foot..........................................3/4”
Depth of taper..........................................6”
Diameter of hole through spindle.............5”
Spindle nose to machine centre...............5” - 26”
SPEEDS & FEEDS:
Cutter speeds.........(13)...........................18 - 110 stroke per min
Feeds.................(16)................................24 - 686 seconds per tooth
ELECTRICAL EQUIPMENT:
Main motor...............................................7.5 HP @ 1500 rpm
Hydraulic pump motor..............................2 HP @ 1500 rpm
Coolant pump motor.................................1/2 HP @ 3000 rpm
NETT WEIGHT............................... 24,900 lbs