Geka Bendicrop 60

$26,555.00 Exc. GST
New
Geka
Bendicrop 60

Hydraulic ironworker machine with 2 cylinders and a bending station. Compatible with Punches & Dies. Multiple cutting options available as well as CNC options. The BENDICROP models have the same workstations as the HYDRACROP, but these machines also have a permanent bending station. The machines are therefore more complete than conventional ironworkers because they can perform bending tasks in a simple and safe way. The Bendicrop 60 model comes with:

• Electric stop.
• With 40 and 70 mm V bending dies.
• Triangular notching with table.
There are two different versions of this model:
• Bendicrop 60S (250mm throat)
• Bendicrop 60 SD (500mm throat).

 

Main Features

 

1.- One and two cylinders ironworkers with six
work stations. Exclusive from Geka.
- Permanent bending station complying with CE
standards.
- Punching
- Notching
- Shear for flat bars
- Angle cutting
- Cutting of round and square bars

2.- Blade holder’s vertical movement that gives
the machines an excellent performance.

3.- Fitted with an anti-torque system to reduce
deformation when shearing flat bars. The
BENDICROP models are fitted with a touch and
cut length stop and is delivered with two V-shaped
bending dies.

4.- Goose neck die-holder for punching of D and E
sections on legs and webs.
5.- Quick tool change.

6.- Angle shearing without loss of material. Wide
range of openings for B and A.

7.- Flat bar and plate shearing system with
minimum deformation F mitre shearing up to 45º.

8.- Rectangular and triangular notching with
table. Also suitable for tube notching, rectangular
notching, etc.

9.- Built-in Safety System: The punching guard is
linked to a limit switch so that when this guard
opens, the punch lowers without pressure during
the first pedal interval and rises during the second
interval. This makes centering between the die
and punch easier and safer for the user
 

 

Demonstration Available!

Check: https://ppt.co.nz/specification/geka-bendicrop-series/#1524437950435-40b...

 

Contact: sales@ppt.co.nz

PPT: 09 917 3770         Or          Stewart Church: 021 650 261

 

Industry:
Sheet Metal Machinery
Category:
Punching and Shearing
Listing Date:
29-05-2019